Thanks for your purchase of Roswell Replacement Bungees for your Roswell rack.
Your replacement bungee kit will include a set of hog rings and heat shrink tubing to secure the new bungees to the rack, here's the installation process:
- Feed the heat shrink tubing over one end of the bungee cord and pass the bungee through the hole in the end of the rack fork.
- Loop the bungee back over itself and secure with the included Hog Clip (http://www.secondchancegarage.com/public/524.cfm).
- Slide the heatshrink tubing down over the end of the bungee and heat gently with even heat to shrink in place (https://www.youtube.com/watch?v=Y8wjv6lj5KU).
If that process fails, you can always tie a Figure 8 Stopper Knot in the end of the bungee to secure it in place (https://www.youtube.com/watch?v=9jYvnMtg7Ws)
Hopefully that helps, if you run into any issues feel free to contact a Product Advisor for assistance.